Tuesday, April 8, 2014

Ampersand

Here is a build I've done twice now. One for Mark Mckellar of Age of End and one for a friend in the area. This was a very difficult build. There were a few challenges and snags in the process of it. First was the layout it self. The first 2 I tried didn't work at all. even after hours of debugging. The 3rd worked but was ticking. This is common for this pedal because the "clock" (IC chip) and the BBD (modulation control chip) generate noise that could come through the OP AMP and create a faint ticking. I was able to eradicate the ticking buy using different OP AMPS and shielded wire. The pedal sounds great and is a nice lush, thick chorus. I used the layout from sabrotone and fit it into a 125B enclosure. The art and graphics are my own. Well Hope you like it.

Ampersand #1








Ampersand #2




Here is a demo I put up on YouTube



Wednesday, March 26, 2014

Flanel Boost & Botany Boost

     These Two boost pedals are the same electronics. I did these custom for two customers of mine. The Flanel Boost was built for Darren Hawe. He plays guitar in a band called Mask and Raid. The Botany Boost Was Built For Robert Beal. He plays in a band called The Screen.
     The electronics are based on the AMZ Mini Boost. It is a vero layout of the schematic. I used some different components but stuck pretty close to the Schematic. Here are some pictures.

The Schematic:
The Flanel Boost:



The Botany Boost:




I was able to build both boost pedals in a Hammond style 1590A enclosure. This is a challenge do to the sheer size of the enclosure. I hope you enjoyed reading. There will be many more to come!

UPDATE:
Here is a Video of the Flanel Boost

New Adventures!

So, If you can see from the other blogs on my page I like to build stuff. I decided to start building fx pedals. It's a hobby, or as i like to call it, a "non-profit organization". I do it for fun and if i break even great!. I've sold a few and done a few mods so far. I chose the name "Custohm Electronics" because I think it's clever. It has to do with resistor values, and these are used in almost all guitar fx. So here I will post all of my build reports, among other things. Thanks for reading!