Hoof

...And i'm back! Here is a clone of the EQD Hoof. I did this as a trade to my friend Evan. He gave me all the AWESOME Spawn figures before. His original hoof died and was broke due to COVID-19 and him being out of work. He did find a couple more spawn figures and what can I say...I'm a sucker for spawn stuff! So I built him a new Hoof pedal. This is almost a exact copy. I used some 2n2222 Transistors for this build, I think they sound a bit better. This wasn't my cleanest wiring job but hey, they can't all be perfect! Anyways here are a couple pictures. I didn't shoot a video but we all know what a modified muff sounds like. Enjoy!
-Mike-

The Great Destroyer

Hello all,
This is my layout of the "Machete". The Machete was designed by Rej and his team at grind customs fx. This is an Ugly Face with LFO mods. The LFO has an on off switch that bypasses the the lfo all together. I designed the PCB out of "need", I have a friend that is looking for one and Rej's store is down. I asked if i could do my own layout and the "unicorn slayer" gave me permission. Any way her are some pictures and a quick video. Thanks for looking / watching.

And here is a quick video with an awesome 90's Filter riff!!!

Auto Tron

Hello All,
     Sorry for the length in between posts, I've been super busy plus my kids Daycare has been closed for the past 2 weeks (vacation). So, I haven't had a whole lot of time. But I was able to finish this one up for a customer. It is a clone of the Mutron III. There are a couple of mods done to the circuit to make it a bit more "buildable". The Original pedal worked off of 24 volts and used the VTL5c3/2. The VTL is a vactrol with 3 legs on the resistor side (one is common). These have been discontinued and are expensive. This uses 2 of the more standard vactrols. This also has a charge pump built into the circuit so the power is now a standard 9 volt power supply. The last mod is a volume mod. The original does not have a volume control. This does.

     I did the art layout and paint on this enclosure. It isn't actually paint, It's alcohol ink. This was fun to work with. I put a bunch of drops of different colors on the pedal and blended them with a Q-tip. then before it dried, I lit it on fire. Yup thats right, the alcohol caught and created a smother blend. Then I clear coated the enclosure to create and even surface for the decal and applied it. Then clear coated again and drilled and assembled. Here are a few pictures of the finished product.

Thanks for reading!

-Mike-

Holy MOTHER OF ELECTRONICS!!!

So a while ago a fellow builder (Dan Minner) and I started to collaborate on a multi build that was based heavily on the "post-rock" and "post-punk" genre of music. Specifically for ambient and textural sounds, more or less that "wall of sound" type effect. This was going to be very in depth and complicated for us. The original design of the enclosure/s was scrapped due to a fabrication issue and we ended up using the biggest Hammond Enclosure we could find. This resulted in a pedal that is almost the size of a sheet of paper. It's massively AWESOME. Dan did the layout for the knobs and all the art work on the enclose. I Etched all the PCBs and assembled this monster. Here are the Circuits that the pedal is made up of.

Way Huge - Red Llama Clone - This is controlled by the Level and Gain controls on the pedal. It is a fuzz type effect and also acts as the main on / off of the pedal. None of the other effects will come on with out this engaged. You can how ever turn the other effects on before engaging the RL.

Dead Astronaut - Flying Saucer Reverb - This is a VERY spacey / oscillating reverb. This is controlled but the Reverb Mix, Damp, Tone, OSC switch, and hidden Bright switch (red cap). This is probably the most versatile reverb I have ever had the chance to play with.

Mad Professor - Deep Blue Delay - This is a great clean sounding PT2399 delay. It leaves nothing to be desired in the delay field. This is controlled by the Delay Mix, Feedback, and, Delay pots. Great for those longer, almost oscillating repeats.

Parasit Studios - Sonic Reducer- Your 8 Bit MADNESS! This is controlled buy the 8-Bit toggle switch, Rate, and Resolution pots. This adds that extra weirdness that both Dan and I love. Plus Parasit Studios has some of the coolest original design effects out there.

Now this being my first multi build it was a bit of a challenge. I had to figure out how to wire 4 circuits together. Most people start out with 2, but no...I HAD TO DO 4! I did it though. This thing is awesome. I will try to do a demo of it this weekend, Thanks for reading. for now here are some pictures.

Once again Thanks for reading. Here are some links for you to check out!

Dan's Facebook - ADDPedals

Parasit Studios - 8-bit goodness
Other Layouts we used - effectslayouts

UPDATE!

I Finally did a demo for this. Here it is, Enjoy!

Lets start a...UPROAR!?!?!?

Hello All,
       Here is a build report for the Uproar I did for a coworker. The Uproar is a clone-ish of the Shur Riot distortion pedal. The board was designed and laid out by MadBeans Pedals. The 3PDT board was given to me by Laurence from BitchesLoveMySwitches. I exclusivly get my enclosures, jacks, and most of my knobs from him. he is THE BEST!! The PRES MOD was also incorporated along with the Clip switch. The PRES MOD cuts the mids and adds a capacitor in series with another to "boost the highs and lows". This gives it more of a "tube" like distortion feel. The Clip switch allows you to choose different clipping diodes to the circuit. There is a combination of LEDs, Germanium diodes, and silicone diodes, to add different textures and warmth to the overall sound. All that is tech talk for "FLIP THESE SWITCHES AND GET YOUR FUCKING FACE MELTED!!" But seriously, this thing has enough gain and volume to keep up with any boosted 5150 or 6505.
     The build overall was very frustrating for me. It was my fault, and that was the more frustrating part. I had the board all together and I was testing in then I noticed the Gain and Vol knobs were working backwards. No biggie, I thought, WRONG! After 2.5 hours wasted on rewiring and audio probing the board meat its death at the rate of anger against a brick wall. I still can't find all the pieces. The second board came out much smoother and went together like a charm. The only oops I had was I accidently wired the 9v from the board to the GND on the 3pdt daughter board. Once again rushing and not paying attention cost me an hour of testing and cussing. But needles to say I got it together and the thing sound FUCKING METAL!!. In the end I am Pleased with the pedal and my coworker loves it.

Time for some pictures! Unfortunately these will have to do, I didn't have a chance to record a demo.

Top view

                          Gut Shot                                                                           Top view

 

Top View

This is a 125B enclosure. I did the paint as a distressed look. I feel like a distortion pedal needs to look a little beat up. The art is done on a water slide decal and the clear coated over with enamel spray clear coat. Thanks for reading. 

-Mike-

Mod for a friend

Hey guys, 

    Just catching up here. Last month (4/24/14) my baby girl was born. She is now the light of my life and building and modding has slowed to a turtles pace. That's fine though. It gives me a chance to post a couple of other things that I have done. Like this!

     Here we have a mod I did for Darren. It's a heavily modded Ibanez TS9. I changed the cratchy pots, some of the caps, made the clipping diodes switchable, made the drive resistor switchable, along with a ton of other mods. Here is a picture. I will link the video later. Thanks for reading.