Let the Madness Ensue...

Hello Again,
     Now let me first say that this was probably the most complicated build that I have ever done. There are 3 effects plus a order switch and an FX / blend option in this. It was very hard to wrap my head around but in the end I nailed it!! Here is the breakdown of the pedal.

**Main Circuit**

The main tone of this is based on the DBA Sound Saw. What this is, is a two channel frequency filter circuit. The bypass switch turns it on and the filter switch switches between the two channels. Channel one high lights the lows and allows more of a bass-y boost. Channel two accents the highs and mids giving the tone a cutting edge. There is a volume and filter knob for each channel.

**Fuzz Tone**

The fuzz section of this is modeled after the DBA Harmonic Transformer. This fuzz is EVIL! I love it. It is controlled by 1 knob and 2 toggle switches. In this built you'll notice that there are 3 toggle switches for the fuzz, the 3rd switch is simply an on / off option. The knob controls the over all fuzz volume. The switch on the left is the on / off, the switch in the middle is the sign wave switch (changes from triangle to square wave), and the switch on the right is an intensity switch. 

**Delay / Reverb Tone**

This is one of my favorite delay / reverb designs, the circuit is a Madbeans Moodring. This reverb is great and the delay is simple and easy to dial in. This has no on / off switch but the "Ring" knob essentially acts like an on / off. all the way to tho the left is off and all the way to the right is "muffin maker"! 

**Extra Options**

-Blend-

You'll notice that there are 2 extra jacks on the side of the enclosure. These allow you to add another effect and blend it into this circuit. The top jack is the send and the bottom is the return. The blend is panned from left to right. Left is no added effect and right is full effect volume (set on external effect) added to this circuit. 

-Order Toggle Switch-

There is also an effect order switch built into this as well. What this does is puts the fuzz in front or behind the reverb. This gives you a multitude of options. putting the fuzz in front of the effect will give you the "wall of sound" type of effect that a lot of guitarists go for.

So needless to say there was a lot to take in to consideration when building this. The enclosure was designed and etch by Dan at ADD Effects. He and I have worked together on several builds now and I don't see us stopping any time soon. Well that's all I have for now. Here are some pictures for you. I will get the videos posted soon. Thanks for reading.

Videos are coming soon!!!

-Mike-

VIDEO TIME!!!