Monday, March 13, 2017

Mimic Delay for Evan

Hello all,
     Long story short I started collecting comic books again and a friend (old co working for the music store) of mine offered me some Spawn action figures. I said i'd build him a pedal of his choosing for them. He wanted a delay. One of my favorite (might just be my very favorite) builds is the Hamlet Delay but Jon Patton. His use of the charge pump to boost the signal before the chip is genius, It's one of the best sounding PT2399 delays out there, I recommend it to all who haven't built one. This time I used effectslayouts version. I love Jon's layout but i wanted the external tone pot. I also wired the volume as a trimmer and mounted it to the base plate via a piece of vero board and stand offs. I also did a "Slam" mod to it. This is a momentary switch with a 22k resistor soldered to the lugs 2 and 3 of the "Repeats" pot. What this mod does is a ramping oscillation. As long as your foot is depressing the switch it will continue to oscillate. It's a pretty easy / awesome mod. Anyways, here are a few pictures for you. I'll do a demo tonight and post it asap.







Thanks for reading guys!. Hit me up with comments and questions if needed.

3 comments:

  1. Did you use the PCB from the Transfer Image Library? I've noticed the one from the library is different from the imagen on the post...

    ReplyDelete